2B Technologies臭氧分析仪 Models 106-L, 106-M, 106-MH and 106-H

2B Technologies臭氧分析仪 Models 106-L, 106-M, 106-MH and 106-H

Ozone Monitor Models 106-L, 106-M, 106-MH and 106-HFor Industrial Ozone ApplicatioFor industrial ozone applicatio, 2B Tech offe the Model 106-L, 106-M, 106-MH and 106-H Ozone Monito, where L, M, MH and H refer to Low (0-100 ppm), Medium (0-1,000 ppm)06-, Medium-High (0-10,000 ppm) and High (0-20 wt%) ozone concentratio, respectively. These itruments have different optical path lengths in order to accommodate an extremely wide range of ozone concentratio, spanning more than eight orde of magnitude. Additionally, the Model 106-H was designed with a flow-through path that can be pressurized to up to 50 psi for in-line measurements with ozone generato. All four models are available in either a standard enclosure or Industrial enclosure. Configuratio for multi-channel sampling are available for Models 106-L, 106-M, and 106-MH.The Model 106 series was designed as an 'ozone monitor on a board' in which nearly all of the components are mounted directly to the printed circuit board. Thus, the Model 106 may be purchased without the enclosure for OEM applicatio. See: Model OEM-106.The Model 106-L is designed for ambient low measurements down to very low ppb levels and has been designated by the EPA as a Federal Equivalent Method (FEM) for monitoring for compliance with the US Clean Air Act: EQOA–0914–218.Our video describes the different models and configuratio for our Model 106-Series Ozone Monito, and could help determine which model is best for a particular application. Click here or scroll down on this page to view the video.Specificatio for Different Optical BenchesModelRangeResolutionPrecision & Accuracy106-L0-100 ppm0.0001 ppm (0.1 ppb)Higher of 0.0015 ppm (1.5 ppb) or 2% of reading106-M0-1,000 ppm0.01 ppmHigher of 0.01 ppm or 2% of reading106-MH0-10,000 ppm (0-1 vol%)0.1 ppmHigher of 0.05 ppm or 2% of reading106-H0-20 wt% O2 or Air0-14 vol%0.01 wt%0.01 vol%Higher of 0.01 wt% or 2% of readingGeneral SpecificatioMeasurement PrincipleUV Absorption at 254 nmMeasurement Interval2 sData Averaging Optio2 s, 10 s, 1 min, 5 min, 1 hrFlow Rate~1 Litemin; Up to 20 L/min for Model 106-HData Storage32,736 lines (10 s avg. = 3.7 days; 5 min avg = 113 days)Choice of Unitsppb, pphm, ppm, μg m-3, mg m-3 (for Models 106-L and 106-M)ppm, mg m-3 (for Model 106-MH)vol%, wt% air, wt% O2, g/m3, g/Nm3 (for Model 106-H)Data OutputsUSB, 232, 0-2.5 V Analog, 4-20 mA, LCD DisplayPower Requirements100-240 V AC, 50/60 Hz11-28 V DC, nominally 500 mA at 12 V DC, 6 watt for Models 106-L, M, and MH11-28 V DC, nominally 325 mA at 12 V DC, 3.9 watt for Model 106-HSize (standard enclosure)3.6 x 7.9 x 9.4 inches (9 x 20 x 24 cm)Weight (standard and OEM)4.2 lb (1.9 kg) for Model 106-L; 2.8 lb (1.3 kg) for OEM-106-L3.9 lb (1.8 kg) for Models 106-M, -MH; 2.5 lb (1.1 kg) for OEM-106-M, -MH4.4 lb (2.0 kg) for Model 106-H; 2.9 lb (1.3 kg) for OEM-106-HSize (Industrial enclosure)16 x 14 x 9.3 inches (40.7 x 35.7 x 23.6 cm) H x W x DWeight (Industrial enclosure)~14 lb (6.4 kg) depending on model and multichannel optioFeaturesMeasurement based on UV absorptionLow power coumption; can be battery operated (optional lithium-ion battery)Internal data logger with real-time clock2-s measurement intervalOn-board microprocessor with interactive menus includes data averaging optio of 10 s, 1 m, 5 m and 1 hrUSB and -232 output of time/date, O3 concentration, internal temperature and pressureAnalog output (0-2.5 V and 4-20 mA) of ozone concentration in user selected unitsTwo 2-level relays for control purposes (e.g., control of ozone source or turn warning light on and off); Four 2-level relays in Industrial enclosure models and in the 3-channel and 6-channel optional configuratioLong-life pump (15,000 hr) for Models 106-L, 106-M and 106-MHBluetooth option for wireless data tramissionOptional configuratio for 3-channel or 6-channel air sampling for Models 106-L, 106-M, and 106-MHhttp:lypeper.b2b168.com