HITACHI AIC Inc. CEB电容

HITACHI AIC Inc. CEB电容

HITACHI AIC Inc. Screw terminal type aluminum electrolytic capacitor ALUMINUM ELECTROLYTIC CAPACITOR @ .Product Name and Type 1. Product Name : Alminum Electrolytic Capacitor 2. Shape : Metal 3. Type : SERIES (85℃,2000h) Screw and Mounting Bracket will not be attached with Capacitor. @ .Specifications 1, Operating Temperature Range: 一40~+85℃ 2. Capacitance Tolerance : 一20~+20% (at 120Hz 20℃) 3, tan8 (Dissipation Factor) :0.15 (at 120Hz 20℃) 4. Rated Voltage : 5. Surge Voltage : 6. Capacitance : 7, Leakage Current : 8. Permissible Ripple Current : Permissible ripple current stated below. Capacitors temperature. applied is be calculated for conversion, using the figure shall be used within 60A from restriction on M5 terminals temperture. Part Number, Rated Voltage VDC, Surge Voltage VDC, Nominal capacitance, Leakage:Current (mA) , Max. Ripple Current(Arms), size Φ*L CEB2G102Y 400V 450V 1000UF 4.0 5.0 51*75mm CEB2G222Y 400V 450V 2200UF 5.0 9.2 51*130mm CEB2G272Y 400V 450V 2700UF 5.0 9.9 51*130mm CEB2G332Y 400V 450V 3300UF 5.0 11.8 64*115mm CEB2G472Y 400V 450V 4700UF 5.0 14.9 77*115mm CEB2G562Y 400V 450V 5600UF 5.0 19.1 77*130mm CEB2G682Y 400V 450V 6800UF 5.0 17.0 77*155mm CEB2G822Y 400V 450V 8200UF 5.0 23.5 90*157mm CEB2G103Y 400V 450V 10000UF 5.0 25.9 90*157mm 9. Withstand voltage (Between terminals bundled and Bracket) :1500V.AC, lminute 10. High temperature Loading : Application of permissible ripple current at 50Hz to the capacitors for 2000 hours at the ambient temperture of 85 0C with a maximum voltage so that the sum of a peak of DC and AC voltages becomes equivalent of the rated voltage. These shall be kept for 12 to 24 hours under standard condition(comply with JIS-C-5102) and shall be satisfied with the following. Leakage Current;No more than initial value specified Capacitance Change;士15% initial value measured Dissipation Factor;No more than 17596 of initial value specified Appearance;No notable change to be found. 11.High Temperature Storage (Steady State): After storage of 500 hours at 850C with out voltage applied, rated volltage is applied for one hour through a 1kSZ resistor at 200C then stabilized for 12 to 24 hours. After completion of this, electrical measurement is made. Capacitor characteristics shall be satisfied with the following. Leakage Current;No more than initial value specified Capacitance Change;士15% initial value measured Dissipation Factor;No more than 175% of initial value specified Appearance;No notable change to be found 12. Surge Voltage: The surge voltage is applied for 1000 cycles at 85℃of 30±5 seconds at voltage through a 1kΩ series resistor for a period of 6士0.5 minutes. These shall be kept for 12 to 24 hours under standard condition and shall be be satisfied with the following. Leakage Current : No more than initial value specified Capacitance Change: 士15% initial value measured Dissipation Factor: No more than initial value specified Appearance: No notable change to be found