广州汽车烤漆房 烤漆房设计 钣喷流水线 烤漆房价格 中川机电设备厂
标准型2000 烤漆房技术配置表 电加热Electric
型号 Standard ZC-2000
参数 内尺寸:6900*3900*2650mm(L*W*H)
Inside Dimension: 6900 * 3900 * 2650 mm (L * W * H).
外尺寸:7000*5350*3350mm(L*W*H)
Outside Dimension: 7000 * 5350 * 3350 mm (L * W * H).
正面门:1.8铝合金包边框架3扇大门,折叠门尺寸:3000×2600mm(W×H)颜色与墙体一致
Main Door: Aluminum alloy binding framework(thickness:1.8mm), folding door size:3000 * 2600 mm (W * H)color consistent with the wall.
工作门:一扇600*1800,工作门配两个压力锁,颜色与墙体一致
Personal Door: One fan 600 * 1800, 50 mm thick, EPS wallboard production, aluminum alloy binding, with two pressure lock.
墙板:50mmEPS(聚苯乙烯)插口型保温板
Wall Panel: 50 mm EPS (polystyrene) mouth insulation board, galvanized roof.
**板:采用镀锌钢型板扣装组合,这种钢板既具有**的防锈性能,延长其使用寿命
Roof:Galvanized steel panel
地台:270mm高的全钢制拼装式,两道花纹板,三道镀锌地格栅,二个520*2000mm(W*L)上车坡
Basement: Complete steel assemble 270 mm thick, two decorative pattern plate, three grille, two car step 520 * 2000 mm (W * L).
照明系统:上排斜置45°**烤房倾斜顶灯,8组×3支=24支,每支36W,光照度: ≧800lux,灯箱冷板制作
Lighting System: Lamp boxes are 45° fixed on upper two side:With8groups*3pcs=24pcs*36 W, illuminate≧800 Lux.
机柜装置:侧上进风、镀锌方管框架、阻燃型聚苯乙烯泡沫板蒙合制成,结构稳固、牢靠、美观、便于维修保养;烟管采用0.6镀锌板制作,3节700×700×1000mm的直管,一个90°弯头,并配有专业角码法兰。
Rack device: Intake air form the edge upper, aluminum alloy frame, EPS wallboard production, coated steel;Air duct made of Galvanized plate(Thickness is 0.6mm),700*700*1000mm,3 pcs straight,1 pcs elbow.
进风机:采用引进西门子技术生产的YDW系列离心式风机,此风机具有噪音低,风量大,能耗少等优点: 流量:12500m3/h/台;全压800Pa;转速:900rpm;功率:4KW;数量:2台
Intake Fan: 2 * 4 KW double inlet air centrifugal fan, air volume of 25000 cubic meters/hour
排风机:无
Exhaust Fan: none
加热系统:红外线加热系统,左右墙体各加装3组红外线烤灯,后侧墙体加装2组,一共8组,每组3KW(含3支红外线烤灯,每支1KW)较大发热量24万大卡,该系统以较强的红外热辐射为热源,*通过介质转换直接辐射被加热体,在空间沿内形成宽谱波定向辐射,使被加热体由里向外快速干燥。
Heating system: infrared heating 8*3KW, the maximum heat 240000 calories, the highest temperature of 80 degrees Celsius
过滤系统:初效过滤、****棉过滤,初效进风过滤为优质过滤棉, 有效捕捉大于10μm的尘粒; **部高效过滤的过滤棉, 有效捕捉大于5μm的尘粒;
Filtration system:Early effect filter, advanced cotton, inlet air filter for high quality filter cotton, effectively capture the dust particles greater than 10 microns; At the top of the high efficiency filter, effectively capture greater than 5 microns dust;
电控系统
采用优质电子元件组装, 主回路设有多重保护; 照明开关、喷漆、升温喷漆、烤漆温度、时间设定、故障指示灯
Control system: lighting switch, spray paint, spray paint of temperature, drying temperature and time setting, emergency stop, limit the warm, failure alarm.
电压频率:380V 50HZ
Voltage Frequency:380V 50HZ
总功率:32.5KW
Total Power:32.5KW